MattPear Neodymium Port Magnets – Genuine Spare (2pc)

MattPear neodymium port magnets — 14.8 mm v2.0 coating for a firm, fuss-free hose hold

What it is, why it helps, how it works: These are the small but mighty neodymium magnets that sit inside your MattPear base ports. They’re the “snap” behind MattPear’s magnetic port system, keeping your hose connector and purge valve seated. If your hose no longer clicks in confidently, or you see corrosion on the old magnets, swapping in a fresh pair restores that secure hold and smooth purge. Simple part, big difference.

Refresh the core of your MattPear port connection with genuine neodymium magnets featuring the updated protective stack (Ni–Cu–Ni plus polymer/epoxy coat). Sized for MattPear’s M & S series ports, they bring back that confident magnetic lock and consistent purge behaviour without changing the draw you love.

What sets it apart

• Reliable magnetic lock because the neodymium grade and 14.8 mm face match MattPear’s port geometry.
• Better corrosion resistance with a Ni–Cu–Ni base coat and added polymer/epoxy barrier to protect against moisture.
• Drop-in fit for MattPear M & S series (e.g., Simple M, Classic M, Ready S) so you can restore stock performance with minimal fuss.
• Steady purge behaviour from correctly sized magnets that keep the valve path properly seated.
• Genuine spare parts from a brand we list and support — see our MattPear collection.

Fit & compatibility

Confirmed fit for MattPear M & S series hookahs (e.g., Simple M, Classic M, Ready S lines). If you have a rare/legacy variant and are unsure, compare dimensions below or message us before purchase.

How to dial it in

• Inspect first: if the old magnet shows rust spots, pitting, or a weak hold, replace as a pair.
• Swap safely: use non-marring tweezers; avoid prying against the port rim. Keep magnets apart so they don’t snap together sharply.
• Seat flush: the magnet face should sit flat in the port recess — no tilt, no wobble.

Craft & performance

Neodymium (NdFeB) delivers high pull strength for a positive “click-in” of the hose connector and consistent valve sealing. The multi-layer coating resists micro-cracks that can lead to corrosion, helping ports stay cleaner between deep cleans.

Care & upkeep

• After rinsing your base, dry the port area thoroughly to minimise moisture sitting on the magnets.
• Avoid harsh acids/alkalis on the ports; stick to neutral cleaners and soft brushes (browse Cleaning Essentials).
• If you store your hookah assembled, ensure the hose connector isn’t left half-seated — keep it either fully attached or fully off.

Quick fixes

Specifications

In the box

• 2 × MattPear neodymium replacement magnets
• Not included: installation tools or adhesives

FAQ

• How often should I replace them? There’s no fixed interval. Replace when hold strength weakens, you see corrosion, or the hose/valve no longer seats cleanly after a proper clean and dry.
• Do these change the draw? No — magnets secure the port interface; they don’t alter the internal airway sizing of your stem.
• Will they fit my Ready S? Yes — Ready S is part of the S series covered by the fit notes above.

Shipping

We ship worldwide from Melbourne, Australia.