King Buzz Shisha Foil – 20 m Unpoked Roll

King Buzz shisha foil roll — 20 m cut-to-size for steadier heat and clean airflow

In simple terms: this is a 20-metre roll of aluminium foil made for covering your shisha bowl. You pull out what you need, wrap it tight over the bowl, and poke your own holes. That lets you control airflow and heat so flavours stay smooth and the session runs even. It’s a fuss-free staple that works with phunnel and traditional bowls, and with natural coconut coals.

What sets it apart

• Dialled heat control because you set your own hole pattern, from tight rings for blonde leaf to wider rings for darker mixes.
• Consistent sessions with a long 20 m roll — cut fresh each time instead of reusing sheets.
• Universal bowl fit since it’s a single unpoked roll you can tension across phunnel or traditional heads.
• Pairs cleanly with 26 mm coconut charcoal for steady heat and low ash.
• Brand match for King Buzz owners — keep your setup consistent with the King Buzz range.

Fit & compatibility

• Bowls: Fits phunnel and traditional clay bowls (wrap tight; smooth the rim).
• Heat: Best with natural coconut charcoal (2–3 × 26 mm cubes). Works with most lounges’ coal routines.
• HMD note: Heat management devices usually don’t need foil; some smokers add a thin foil buffer by preference.

How to dial it in

• Wrap a fresh sheet and pull the foil drum-tight over the bowl so it “taps” like a snare.
• Poke small, even holes: start with a ring near the outer edge; add a second ring for more airflow; keep the centre closed on phunnels.
• Start with two coals; add a third after 5–7 minutes if the flavour sits “cold”. Rotate coals every 6–8 minutes.

Craft & performance

• Predictable heat curve when tensioned properly — fewer hot spots and more stable flavour.
• Clean airflow response through a tidy hole map, so clouds build smoothly without harsh spikes.

Care & upkeep

• Store the roll dry; avoid crumpled, oily, or torn sections.
• Use a clean poker; avoid oversized holes that collapse heat.
• Always use a fresh sheet; don’t reuse foil between heads.

Quick fixes

• Harsh or spicy pulls → add 6–8 tiny holes; move coals to the rim; let the head breathe for 10–15 sec.
• Thin clouds → fully light coals; add a third cube after warm-up; check your hole rings reach the coal path.
• Sagging foil → re-wrap tighter; double-layer if your bowl rim is rough.

Specifications

In the box

• 1 × King Buzz Shisha Aluminium Foil Roll (20 m)

FAQ

• Is it pre-punched? No — it’s an unpoked roll so you can customise airflow.
• Does it work with heat management devices? Most HMDs don’t need foil. Some users add a thin buffer layer by choice; it’s optional.

Browse all shisha foil options or see our King Buzz guide for matching accessories.

Shipping: We ship worldwide from Melbourne, Australia.