King Buzz 50cm Cube Shisha with Diffuser & LED Light

King Buzz cube-base shisha, 50 cm with diffuser, LED light—easy first setup

What it is, why this helps, how it works, and why to get one: This is a compact, 50 cm King Buzz shisha built around a tough acrylic cube base and a simple single-hose setup. It’s made for first-timers who want the full experience without the big spend. The downstem includes a diffuser for a smoother, quieter pull, and the kit ships with a clay bowl, silicone hose, tray, tongs and an LED puck (batteries not included). Fill the base, pack the bowl, add lit coals, and you’re set.

What sets it apart

• Smoother draw, less noise: Built-in diffuser on the downstem helps break bubbles for a calmer, easier pull—ideal for beginners learning heat control.
• Stable compact footprint: 50 cm tall with a 15 × 15 cm cube base, so it sits steady and takes little table space.
• Ready to start: Includes traditional clay bowl, 1.5 m washable silicone hose, metal tray, and tongs—no extras needed to run (charcoal and batteries sold separately).
• LED ambience: Under-base LED puck with remote adds colour and visibility while you dial things in (batteries not included).
• Easy upkeep: Acrylic base and aluminium-look stem clean with warm water and mild detergent; hose rinses clear after each session.

Fit & compatibility

• Hose ports: Single-hose configuration out of the box.
• Bowl: Traditional multi-hole clay bowl; best with foil.
• Charcoal: Start with 2 × 26 mm cubes or hex coals on foil; add a third only if the flavour needs more heat.

How to dial it in

• Fill the base until the downstem sits 10–15 mm under water.
• Pack your mix loosely in the bowl, foil tight, 20–25 pinholes over the tobacco.
• Begin with 2 lit 26 mm coals at the rim; after 5–7 minutes, adjust or add a third if needed.
• If smoke gets harsh, lift a coal for 10–15 seconds or rotate to the edge.

Craft & performance

• Base: Gloss acrylic/plastic cube, 15 × 15 cm.
• Stem & tray: Aluminium-look metal components for light weight and easy handling.
• Hose: 1.5 m silicone hose with metal tips; washable.
• Purge: Standard single purge; expect 2–3 exhales to clear the base.

Care & upkeep

• Rinse stem and hose with warm water after use; air dry fully.
• Use mild detergent only; avoid boiling water or abrasives on acrylic and plated parts.
• Keep grommets lightly greased with food-safe silicone for easy assembly.

Quick fixes

• Thin clouds: Check all seals, fully light the coals, and raise heat gradually.
• Harsh taste: Reduce heat briefly, rotate coals, or add a thin extra foil layer.
• Noisy draw: Lower the water level slightly; the diffuser should sit just under the surface.

Specifications

In the box

• King Buzz Cube 50 shisha (acrylic base, stem, tray, purge set)
• Traditional clay bowl
• 1.5 m silicone hose
• Metal tongs
• LED puck light + IR remote (batteries not included)

Not included: Charcoal, flavours, foil or HMD.

FAQ

• Can I use a heat management device (HMD)? This bowl is traditional and works best with foil. Some HMDs may sit, but fit varies—foil is the safe pick.
• How much water should I use? Submerge the diffuser tip by ~10–15 mm for an easy, quiet draw.
• Is the hose washable? Yes—rinse the silicone hose with warm water and let it dry fully.

Explore more from the brand in our King Buzz collection, brush up with our beginner setup guide, and grab a spare or upgraded hose from our hoses range.

Shipping

We ship worldwide from Melbourne, Australia.